Engineers Harness Cell Phone Technology for use in Medical Imaging

Wednesday, April 30, 2008

Boris Rubinsky, professor of mechanical engineering tells how his team conceived and developed a new device that uses cellphones to make medical imaging much cheaper and more accessible to the poor.

According to the World Health Organization, some three-quarters of the world's population has no access to ultrasounds, X-rays, magnetic resonance images, and other medical imaging technology used for a wide range of applications, from detecting tumors to confirming tuberculosis infections to monitoring developing fetuses.

"Medical imaging is something we take for granted in industrialized countries," said Boris Rubinsky, UC Berkeley professor of bioengineering and mechanical engineering and head of the team that developed this new application for cell phones. "Imaging is considered one of the most important achievements in modern medicine. Diagnosis and treatment of an estimated 20 percent of diseases would benefit from medical imaging, yet this advancement has been out of reach for millions of people in the world because the equipment is too costly to maintain. Our system would make imaging technology inexpensive and accessible for these underserved populations."

This new technique for medical imaging is described in the April 30 issue of the peer-reviewed, open-access journal, Public Library of Science ONE (PLoS ONE).

Rubinsky, who holds a joint appointment as director of the Research Center for Bioengineering in the Service of Humanity and Society at Hebrew University in Jerusalem, worked on this project with Ph.D. student Yair Granot and post-doctoral researcher Antoni Ivorra. Both researchers are in the UC Berkeley Biophysics Graduate Group.

Rubinsky noted that simply donating imaging devices to the world's poorest regions is not a viable, long-term solution. "More than half of the medical equipment in developing countries is left unused or broken because it is too complicated or expensive to operate and repair," he said. "We set out to develop something that locals could sustain on their own, as well as something that is relevant to local economies and technologies."

Most medical imaging devices, said Rubinsky, consist of three essential components: the data acquisition hardware that is connected to the patient, the image processing software and a monitor to display the image. When these components are combined into one unit, machine parts often become redundant, substantially increasing the cost of the device, he said.

Rubinsky and his team came up with the novel idea of physically separating these components so that the most complicated element - the processing software used to reconstruct the raw data into a meaningful image - can reside at an offsite central location, presumably in a large center where resources are available for its operation and maintenance. This central location would be used to service multiple remote sites where far simpler machines collect the raw data from the patients.

That's where the cell phone comes in. The phone, hooked up to the data acquisition device, would transmit the raw data to the central server where the information would be used to create an image. The server would then relay the image back to the cell phone, where it can be viewed on the cell phone's screen.

"This design significantly lowers the cost of medical imaging because the apparatus at the patient site is greatly simplified, and there is no need for personnel highly trained in imaging processing," said Ivorra, the post-doctoral researcher. "The data acquisition device can be made with off-the-shelf parts that somebody with basic technical training can operate. As for cell phones, you could be out in the middle of a remote village and still have cell phone access. They're so prevalent because so little infrastructure is required to maintain wireless networks."

The principle behind medical imaging is the production of a map based upon the physical properties of different types of tissue, such as tumors, muscle and fat. An MRI, for instance, produces a map of proton density in different tissue, while an ultrasound produces a map based upon pressure waves.

The researchers chose electrical impedance tomography (EIT) to demonstrate the feasibility of using cell phones in medical imaging. EIT is based upon the principle that diseased tissue transmits electrical currents differently than does healthy tissue. The difference in resistance to electrical currents is translated into an image.

The National Center for Research Resources at the U.S. National Institutes of Health (NIH) is supporting Rubinsky's research on the use of EIT to control gene therapy and cancer treatment in patients. The findings reported in the PLoS ONE paper demonstrate that these advanced medical technologies, which are dependent on EIT imaging, are not restricted to highly industrialized locations. Instead, they can be used in underserved areas of the world where there are limited resources.

Utilizing commercially available parts, the research team built a simple data acquisition device for the experiment. The device had 32 stainless steel electrodes - half to inject the electrical current and the other half to measure the voltage - connected to a gel-filled container that simulated breast tissue with a tumor.

A total of 225 voltage measurements were taken and uploaded to a cell phone, which was hooked up to the device with a USB cable. The cell phone was then used to dial into a powerful central computer that contained software to process the packet of raw data that was transmitted. An image was then reconstructed and sent back to the cell phone for viewing.

The researchers verified that the simulated tumor was clearly visible in the image, demonstrating the proof-of-principle that this system is feasible.

"This could open up whole new avenues of health care for the developing world," said Rubinsky. "Health professionals in rural clinics could affordably get the tools they need to properly diagnose and treat their patients."

The researchers said this system could work with any cell phone capable of sending and receiving multimedia messages such as graphics, video and audio clips. "The size of the data in the study was only 6 kilobytes, which is ridiculously small," said Granot, the Ph.D. student on the research team. "A one sentence, text-only e-mail message is bigger than that."

As for concerns about dropped calls, "there is no medical application that would not allow us to redial a line," said Granot. "Transmitting voice signals is actually more challenging than sending this imaging data, so it shouldn't be a serious problem."

Rubinsky said the screen size of a cell phone should not be a major impediment since "people are able to watch full movies on their iPods."

"In my opinion, this concept would be valuable for developed nations as well," said Rubinsky. "One of the main problems of medical care is the increased cost of health care. It may be worthwhile to consider this as a way of reducing the cost of medical imaging."

In addition to the NIH, the Israeli Science Foundation and Florida Hospital in Orlando also supported this work.

Source: University of California, Berkeley / Sarah Yang