Pages

Tuesday, November 4, 2025

Fermentation waste used to make natural fabric

 

Penn State Professor Melik Demirel, to the far right, his students and their families wear biomanufactured sweaters. Pictured are Khushank Singhal and Oguzhan Colak, both affiliated with the Department of Engineering Science and Mechanics in the College of Engineering; Ceren Colak, Ela Demirel and Emir Demirel.
Photo Credit: © Oguzhan Colak

A fermentation byproduct might help to solve two major global challenges: world hunger and the environmental impact of fast fashion. The leftover yeast from brewing beer, wine or even to make some pharmaceuticals can be repurposed to produce high-performance fibers stronger than natural fibers with significantly less environmental impact, according to a new study led by researchers at Penn State and published in the Proceedings of the National Academy of Sciences

The yeast biomass — composed of proteins, fatty molecules called lipids and sugars — left over from alcohol and pharmaceutical production is regarded as waste, but lead author Melik Demirel, Pearce Professor of Engineering and Huck Chair in Biomimetic Materials at Penn State, said his team realized they could repurpose the material to make fibers using a previously developed process. The researchers successfully achieved pilot-scale production of the fiber — producing more than 1,000pounds — in a factory in Germany, with continuous and batch production for more than 100 hours per run of fiber spinning.

They also used data collected during this production for a lifecycle assessment, which assessed the needs and impact of the product from obtaining the raw fermentation byproduct through its life to disposal and its cost, and to evaluate the economic viability of the technology. The analysis predicted the cost, water use, production output, greenhouse gas emissions and more at every stage. Ultimately, the researchers found that the commercial-scale production of the fermentation-based fiber could compete with wool and other fibers at scale but with considerably fewer resources, including far less land — even when accounting for the land needed to grow the crops used in the fermentation processes that eventually produce the yeast biomass.   

 
Researchers used the yeast byproduct of fermentation to make fiber.
Photo Credit: © Melik Demirel

“Just as hunter-gatherers domesticated sheep for wool 11,000 years ago, we’re domesticating yeast for a fiber that could shift the agricultural lens to focus far more resources to food crops,” said Demirel, who is also affiliated with the Materials Research Institute and the Institute of Energy and the Environment, both at Penn State.  

“We successfully demonstrated that this material can be made cheaply — for $6 or less per kilogram, which is about 2.2 pounds, compared to wool’s $10 to $12 per kilogram — with significantly less water and land but improved performance compared to any other natural or processed fibers, while also nearly eliminating greenhouse gas emissions. The saved resources could be applied elsewhere, like repurposing land to grow food crops.” 

Waste not, want not 

Demirel’s team has spent over a decade developing a process to produce a fiber from proteins. Inspired by nature, the fiber is durable and free of the chemicals other fibers can leave in the environment for years.  

“We can pull the proteins as an aggregate — mimicking naturally occurring protein accumulations called amyloids — from the yeast, dissolve the resulting pulp in a solution, and push that through a device called a spinneret that uses tiny spigots to make continuous fibers,” Demirel said, explaining the fibers are then washed, dried and spun into yarn that can then be woven into fabric for clothes. He also noted that the fibers are biodegradable, meaning they would breakdown after disposal, unlike the millions of tons of polyester clothing discarded every year that pollutes the planet. “The key is the solution used to dissolve the pulp. This solvent is the same one used to produce Lyocell, the fiber derived from cellulose, or wood pulp. We can recover 99.6% of the solvent used to reuse it in future production cycles.”  

The idea of using proteins to make fiber is not new, according to Demirel, who pointed to Lanital as an example. The material was developed in the 1930s from milk protein, but it fell out of fashion due to low strength with the advent of polyester. 

“The issue has always been performance and cost,” Demirel said, noting the mid-20th century also saw the invention of fibers made from peanut proteins and from corn proteins before cheap and stronger polyester ultimately reigned.    

Freeing land from fiber to produce food 

Beyond producing a quality fiber, Demirel said, the study also indicated the fiber’s potential on a commercial scale. The models rolled their pilot-scale findings into simulated scenarios of commercial production. For comparison, about 55 million pounds of cotton are produced globally every year and just 2.2 pounds — about what it takes to make one T-shirt and one pair of jeans — requires up to 2,642 gallons of water. Raw cotton is relatively cheap, Demirel said, but the environmental cost is staggering.  

“Cotton crops also use about 88 million acres, of farmable land around the world — just under 40% of that is in India, which ranks as ‘serious’ on the Global Hunger Index,” Demirel said. “Imagine if instead of growing cotton, that land, water, resources and energy could be used to produce crops that could feed people. It’s not quite as simple as that, but this analysis demonstrated that biomanufactured fibers require significantly less land, water and other resources to produce, so it’s feasible to picture how shifting from crop-based fibers could free up a significant amount of land for food production.”  

In 2024, 733 million people — about one in 12 — around the world faced food insecurity, a continued trend that has led the United Nations to declare a goal of “Zero Hunger” to eliminate this issue by 2030. One potential solution may be to free land currently used to grow fiber crops to produce more food crops, according to Demirel. Current production methods not only use significant resources, he said, but more than 66% of clothing produced annually in the U.S. alone ends up in landfills. Demirel’s approach offers a solution for both problems, he said.  

“By leveraging biomanufacturing, we can produce sustainable, high-performance fibers that do not compete with food crops for land, water or nutrients,” Demirel said. “Adopting biomanufacturing-based protein fibers would mark a significant advancement towards a future where fiber needs are fulfilled without compromising the planet's capacity to nourish its growing population. We can make significant strides towards achieving the ‘Zero Hunger’ goal, ensuring everyone can access nutritious food while promoting sustainable development goals.” 

Future of fiber 

Demirel said the team plans to further investigate the viability of fermentation-based fibers at a commercial scale.  

The team includes Benjamin Allen, chief technology officer, and Balijit Ghotra, Tandem Repeat Technologies, Inc., the spin-off company founded by Demirel and Allen based on this fiber production approach. The work has a patent pending, and the Penn State Office of Technology Transfer licensed the technology to Tandem Repeat Technologies. Other co-authors include Birgit Kosan, Philipp Köhler, Marcus Krieg, Christoph Kindler and Michael Sturm, all with the Thüringisches Institut für Textil- und Kunststoff-Forschung (TITK) e. V. in Germany.   

“In my lab at Penn State, we demonstrated we could physically make the fiber,” Demirel said. “In this pilot production at the factory, together with Tandem and TITK, we demonstrated we could make the fiber a contender in the global fiber market. Sonachic, an online brand formed by Tandem Repeat, makes this a reality. Next, we will bring it to mass market.” 

Funding: The BioMADE and Defense Industrial Base Consortium supported this work through a grant from the U.S. Department of Defense (DoD). 

Disclaimer: The views and conclusions expressed in this work are those of the authors and should not be interpreted as representing policies or endorsements, either expressed or implied, of the DoD. 

Published in journal: Proceedings of the National Academy of Sciences

TitleImpact of biomanufacturing protein fibers on achieving sustainable development

Authors: Benjamin D. Allen, Baljit Ghotra, Birgit Kosan, Philipp Köhler, Marcus Krieg, Christoph Kindler, Michael Sturm, and Melik C. Demirel

Source/CreditPennsylvania State University | Ashley WennersHerron

Reference Number: btech110425_01

Privacy Policy | Terms of Service | Contact Us