
The new composite was tested on electrochemical cells.
Photo Credit: Vladimir Petrov
Scientific Frontline: Extended "At a Glance" Summary: Composite Electrodes for Solid Oxide Fuel Cells
The Core Concept: Researchers have developed an optimized composite material for the air electrodes of solid oxide fuel cells, blending nickelate with a 20 percent proton electrolyte additive. This new composite significantly increases the power output of the fuel cell and more than doubles the hydrogen production rate while operating at lower, more stable temperatures.
Key Distinction/Mechanism: Traditional solid oxide devices require high operating temperatures (850 to 1,000 °C), causing rapid wear, but reducing the temperature slows oxygen reactions at the air electrode. By adding exactly 20 percent proton electrolyte to nickelate, which has high electronic but low ionic conductivity, scientists established an extensive network of three-phase boundaries for electrochemical reactions without disrupting the continuous pathways needed for electron movement.
Origin/History: The research was conducted collaboratively by the Institute of High-Temperature Electrochemistry of the Ural Branch of the Russian Academy of Sciences and Ural Federal University, with the results published in November 2026 in the "International Journal of Hydrogen Energy."
Major Frameworks/Components:
- Solid oxide fuel cells and high-temperature electrochemical cells.
- Air electrodes tasked with oxygen interaction.
- Nickelate utilized for its high electronic conductivity.
- Proton electrolyte additives applied to create three-phase reaction boundaries.
- Operating temperature reduction from the standard 850 to 1,000 °C range down to a target of 500 to 700 °C.
Branches of Science: Electrochemistry, Materials Science, Physical Chemistry, Energy Engineering, Solid-State Chemistry.
Future Application: Researchers aim to further increase efficiency by reducing the electrolyte membrane thickness from 30 micrometers to between 4 and 10 micrometers, which will minimize internal energy loss. These modular systems could be deployed in as little as 90 days to provide distributed power for large-scale data centers and artificial intelligence campuses.
Why It Matters: Lowering the operating temperature of solid oxide devices prevents rapid material degradation, extends their service life, and reduces overall costs. This structural advancement addresses major barriers to commercialization, paving the way for efficient hydrogen energy integration and rapid deployment in the distributed power supply market.
Researchers from the Institute of High-Temperature Electrochemistry of the Ural Branch of the Russian Academy of Sciences (IHTE UB RAS) and Ural Federal University have improved the efficiency of electrochemical devices for hydrogen energy operating at reduced temperatures. They selected an optimal composite that increased the maximum power of the fuel cell by 1.5 to 1.7 times and more than doubled the hydrogen production rate. The results were published in the International Journal of Hydrogen Energy.
"The development of hydrogen energy is constrained by the high operating temperature of solid oxide devices, which causes them to wear out quickly. Our goal is to reduce the operating temperature to 500–700 °C and make the devices work efficiently under these conditions. The main problem at reduced temperatures is the slowing of electrochemical reactions at the 'air' electrode, which is responsible for interacting with oxygen. To solve this problem, we created a composite—a mechanical mixture of nickelate and a proton electrolyte," said Dmitry Medvedev, head of the research group and head of the Laboratory of Electrochemical Devices Based on Solid Oxide Proton Electrolytes at IHTE UB RAS.
The scientists tested a range of compositions with additives from 0 to 70 percent. The optimal proportion was determined to be a 20 percent proton electrolyte addition to the nickelate base.
"Nickelate has high electronic conductivity but lacks ionic conductivity for fast reactions. The electrolyte additive creates an extensive network of three-phase boundaries—zones where electrochemical reactions occur. However, if there is too much electrolyte (40 percent and above), its particles begin to physically separate the nickelate grains, reducing continuous pathways for electron movement and the device's efficiency. At a 20 percent additive, an ideal balance is achieved," added Artem Tarutin, a researcher at the UrFU Laboratory of Hydrogen Energy.
The new composite was tested on real electrochemical cells.
"Using the optimal composition allowed us to increase the maximum fuel cell power by 1.5 to 1.7 times, up to 330 mW/cm² at 750 °C, and more than double the hydrogen production rate, up to 6 mL/min/cm² compared to pure nickelate," added Medvedev.
The researchers plan to continue working on reducing operating temperatures. To mitigate ongoing energy loss within the electrolyte, the next task is to reduce the membrane thickness from 30 micrometers to between 4 and 10 micrometers.
Reference: The commercialization of solid oxide fuel cells (SOFCs) is constrained by their high operating temperature, which increases product cost and shortens service life. Reducing the operating temperature from the traditional 850–1,000 °C to 500–700 °C is a common direction of global research and development.
Market analysts project the global SOFC market could reach $16.53 billion by 2031, driven by demand from large-scale data centers and distributed power supply projects: connecting a large AI campus to the general grid can take from three to seven years, whereas modular SOFC systems can be deployed on-site in just 90 days.
Published in journal: International Journal of Hydrogen Energy
Authors: Artem P. Tarutin, Liana R. Tarutina, Gennady K. Vdovin, and Dmitry A. Medvedev
Source/Credit: Ural Federal University | Anastasia Pyankova
Edited by: Scientific Frontline
Reference Number: chm111726_01