When Plants Flower: Scientists ID Genes, Mechanism in Sorghum

Brookhaven Lab biologist Meng Xie and postdoctoral fellow Dimiru Tadesse with sorghum plants like those used in this study. Note that these plants are flowering, unlike those the scientists engineered to delay flowering indefinitely to maximize their accumulation of biomass.
Photo Credit: Kevin Coughlin/Brookhaven National Laboratory

Scientists at the U.S. Department of Energy’s (DOE) Brookhaven National Laboratory and Oklahoma State University have identified key genes and the mechanism by which they control flowering in sorghum, an important bioenergy crop. The findings, just published in the journal New Phytologist, suggest strategies to delay sorghum flowering to maximize plant growth and the amount of biomass available for generating biofuels and bioproducts.

“Our studies elucidate the gene regulatory network controlling sorghum flowering and provide new insights into how these genes could be leveraged to improve sorghum for achieving bioenergy goals,” said Brookhaven Lab biologist Meng Xie, one of the leaders of the research.

Sorghum is particularly well suited for sustainable agriculture because it can grow on marginal lands in semiarid regions and can tolerate relatively high temperatures. Like many plants, its growth and flowering (reproductive) cycles are regulated by the duration of daily sunlight. And once plants start to flower, they stop growing, which has important implications for the accumulation of biomass.

For example, one natural sorghum variety can reach nearly 20 feet in height, only transitioning to the reproductive flowering phase near the end of the summer growing season when the duration of daylight diminishes. Other “day-neutral” lines flower earlier, after reaching about three feet in height, producing less vegetation but more grain.

What Makes Birds So Smart?

The avian brain is smaller than that of many mammals, but just as capable.
Photo Credit: Kevin Mueller

Researchers at Ruhr University Bochum explain how it is possible for the small brains of pigeons, parrots and corvids to perform equally well as those of mammals, despite their significant differences.

Since the late 19th century, it has been a common belief among researchers that high intelligence requires the high computing capacity of large brains. They also discovered that the cerebral cortex as typical of mammals, is necessary to analyze and link information in great detail. Avian brains, by contrast, are very small and lack any structure resembling a cortex. Nevertheless, scientists showed that parrots and corvids are capable of planning for the future, forging social strategies, recognizing themselves in the mirror and building tools. These and similar aptitudes put them on a par with chimpanzees. Even less gifted birds, such as pigeons, learn orthographic rules that enable them to recognize typos in short words or classify pictures according to categories such as “impressionism”, “water” or “man-made”. How do they do it with such small brains and without a cortex? With their article in Trends in Cognitive Science, Professor Onur Güntürkün, Dr. Roland Pusch and Professor Jonas Rose from Ruhr University Bochum come closer to solving this more than one hundred-year-old puzzle.

Researchers develop artificial building blocks of life

Structural comparison of DNA and the artificial TNA, a Xeno nucleic acid with the natural base pairs AT and GC and an additional base pair (XY).
Image Credit: Courtesy of University of Cologne

For the first time, scientists from the University of Cologne (UoC) have developed artificial nucleotides, the building blocks of DNA, with several additional properties in the laboratory. They could be used as artificial nucleic acids for therapeutic applications.

DNA carries the genetic information of all living organisms and consists of only four different building blocks, the nucleotides. Nucleotides are composed of three distinctive parts: a sugar molecule, a phosphate group and one of the four nucleobases adenine, thymine, guanine and cytosine. The nucleotides are lined up millions of times and form the DNA double helix, similar to a spiral staircase. Scientists from the UoC’s Department of Chemistry have now shown that the structure of nucleotides can be modified to a great extent in the laboratory. The researchers developed so-called threofuranosyl nucleic acid (TNA) with a new, additional base pair. These are the first steps on the way to fully artificial nucleic acids with enhanced chemical functionalities. The study ‘Expanding the Horizon of the Xeno Nucleic Acid Space: Threose Nucleic Acids with Increased Information Storage’ was published in the Journal of the American Chemical Society.

How the Body Copes With Airway Closure

Image Credit: Scientific Frontline stock image

There is perhaps no bodily function more essential for humans and other mammals than breathing. With each breath, we suffuse our bodies with oxygen-rich air that keeps our organs and tissues healthy and working properly — and without oxygen, we can survive mere minutes.

But sometimes, our breathing becomes restricted, whether due to infection, allergies, exercise, or some other cause, forcing us to take deep, gasping breaths to quickly draw in more air.

Now, researchers at Harvard Medical School have identified a previously unknown way in which the body counteracts restricted breathing — a new reflex of the vagus nerve that initiates deep breathing. Their work is published in Nature.

The research, conducted in mice, reveals a rare and mysterious cell type in the lungs that detects airway closure and relays the signal to the vagus nerve — the information highway that connects the brain to almost every major organ. After the signal reaches the brain, a gasping reflex is initiated that helps the animal compensate for the lack of air.

Reptile roadkill reveals new threat to endangered lizard species

The western spiny-tailed skink.
Photo Credit: Dr. Holly Bradley

The chance sighting of a dead snake beside a sandy track in remote Western Australia, and the investigation of its stomach contents, has led Curtin University researchers to record the first known instance of a spotted mulga snake consuming a pygmy spiny-tailed skink, raising concerns for a similar-looking, endangered lizard species.

Lead researcher Dr Holly Bradley from Curtin’s School of Molecular and Life Sciences said the discovery of the partially digested pygmy spiny-tailed skink within the snake had implications for the vulnerable western spiny-tailed skink species.

“Found about 300km east of Geraldton and likely killed by a vehicle, the snake’s consumption of the pygmy spiny-tailed skink raises concerns about the susceptibility of similar-sized juvenile western spiny-tailed skinks, which also inhabit the Mid-West region and are classified as endangered,” Dr Bradley said.

“Pygmy spiny-tailed skinks look and act a lot like babies of the endangered western spiny-tailed skink, which live in the same area, so if these snakes are preying on one of them, they are likely also preying on the other.

Exploring the Surface Properties of NiO with Low-Energy Electron Diffraction

Antiferromagnetic (AF) crystals like NiO are experiencing a renaissance as promising materials for ultrafast spintronics. To re-establish old experimental results of surface property investigations and present new theoretical analysis, researchers from Sophia University carried out low-energy electron diffraction (LEED) analysis of AF crystal NiO. They reported an I-V spectra of ‘half-order beam’ and observed a surface wave resonance effect, providing useful insights into energy-temperature dependence of LEED and coherent spin exchange scattering in NiO.

Spintronics is a field that deals with electronics that exploit the intrinsic spin of electrons and their associated magnetic moment for applications such as quantum computing and memory storage devices. Owing to its spin and magnetism exhibited in its insulator-metal phase transition, the strongly correlated electron systems of nickel oxide (NiO) have been thoroughly explored for over eight decades. Interest in its unique antiferromagnetic (AF) and spin properties has seen a revival lately, since NiO is a potential material for ultrafast spintronics devices.

Despite this rise in popularity, exploration of its surface magnetic properties using low-energy electron diffraction (LEED) technique has not received much attention since the 1970s. To review the understanding of the surface properties, Professor Masamitsu Hoshino and Emeritus Professor Hiroshi Tanaka, both from the Department of Materials and Life Sciences at Sophia University, Japan, revisited the surface LEED crystallography of NiO. The results of their quantitative experimental study investigating the coherent exchange scattering in Ni2+ ions in AF single crystal NiO were reported in The European Physical Journal D.

Improving Wood Products Could Be a Key to Reducing Greenhouse Gas Emissions

Corrugated cardboard boxes are one of the most important products made from loblolly pine
Photo Credit: Aleksandar Pasaric

Harnessing the ability of wood products to store carbon even after harvest could have a significant effect on greenhouse gas emissions and change commonly accepted forestry practices, a new study from NC State researchers suggests.

The new study published in the journal Carbon Balance and Management uses carbon storage modeling to link the carbon stored in wood products with the specific forest system from which the products originated. Wood products and the forests they come from store different amounts of carbon, and being able to compare the two more specifically would help forest managers better understand these tradeoffs and plan for better carbon storage.

By tracing carbon in southern loblolly pine plantations from planting to harvest, the study also identified specific wood products that are important to improving carbon storage and reducing greenhouse gas emissions. Chief among them were corrugated carboard boxes.

“Corrugated cardboard boxes are one of the most important products made from loblolly pine,” said Sarah Puls, NC State graduate assistant and corresponding author of the study. “If we can extend the effective lifetime of products like these boxes, it could have a significant impact on the carbon storage associated with southern loblolly pine plantations.”

How surface roughness influences the adhesion of soft materials

The illustration shows the contact area of a soft solid that is separated from a rough surface. Each colored spot corresponds to an instability of the contact. The different color intensity shows how much energy is lost in the process.
Illustration Credit: Antoine Sanner, Lars Pastewka.

Adhesive tape or sticky notes are easy to attach to a surface, but are difficult to remove. This phenomenon, known as adhesion hysteresis, can be fundamentally observed in soft, elastic materials: Adhesive contact is formed more easily than it is broken. Researchers at the University of Freiburg, the University of Pittsburgh and the University of Akron in the US have now discovered that this adhesion hysteresis is caused by the surface roughness of the adherent soft materials. Through a combination of experimental observations and simulations, the team demonstrated that roughness interferes with the separation process, causing the materials to detach in minute, abrupt movements, which release parts of the adhesive bond incrementally. Dr. Antoine Sanner and Prof. Dr. Lars Pastewka from the Department of Microsystems Engineering and the livMatS Cluster of Excellence at the University of Freiburg, Dr. Nityanshu Kumar and Prof. Dr. Ali Dhinojwala from the University of Akron and Prof. Dr. Tevis Jacobs from the University of Pittsburgh have published their results in the prestigious journal Science Advances.

“Our findings will make it possible to specifically control the adhesion properties of soft materials through surface roughness,” says Sanner. “They will also allow new and improved applications to be developed in soft robotics or production technology in the future, for example for grippers or placement systems.”

Research sheds light on new strategy to treat infertility

OHSU researchers are advancing a strategy based on somatic cell nuclear transfer to treat infertility through in vitro gametogenesis, or IVG. A study published today describes the science behind the technique demonstrated in a mouse model.
Photo Credit: OHSU/Christine Torres Hicks

New research from Oregon Health & Science University describes the science behind a promising technique to treat infertility by turning a skin cell into an egg that is capable of producing viable embryos.

Researchers at OHSU documented the technique, known as in vitro gametogenesis, or IVG, in a mouse model through preliminary steps that rely upon transferring the nucleus of a skin cell into a donated egg in which the nucleus has been removed. Using mice, the investigators coaxed the skin cell’s nucleus into reducing its chromosomes by half, so that it could then be fertilized by a sperm cell to create a viable embryo.

The study was published today in the journal Science Advances.

“The goal is to produce eggs for patients who don’t have their own eggs,” said senior author Shoukhrat Mitalipov, Ph.D., director of the OHSU Center for Embryonic Cell and Gene Therapy, and professor of obstetrics and gynecology, and molecular and cellular biosciences, in the OHSU School of Medicine.

The technique could be used by women of advanced maternal age or those who are unable to produce viable eggs due to previous treatment for cancer or other causes. It also raises the possibility of men in same-sex relationships having children who are genetically related to both parents.

Instead of attempting to differentiate induced pluripotent stem cells, or iPSCs, into sperm or egg cells, OHSU researchers are focused on a technique based on somatic cell nuclear transfer, in which a skin cell nucleus is transplanted into a donor egg stripped of its nucleus. In 1996, researchers famously used this technique to clone a sheep in Scotland named Dolly.

Nanosurgical tool could be key to cancer breakthrough

Electron microscopy image of the nanopipette.
Photo Credit: Dr Alexander Kulak

A nanosurgical tool - about 500 times thinner than a human hair - could give insights into cancer treatment resistance that no other technology has been able to do, according to a new study.

The high-tech double-barrel nanopipette, developed by University of Leeds scientists, and applied to the global medical challenge of cancer, has - for the first time - enabled researchers to see how individual living cancer cells react to treatment and change over time – providing vital understanding that could help doctors develop more effective cancer medication.  

The tool has two nanoscopic needles, meaning it can simultaneously inject and extract a sample from the same cell, expanding its potential uses. And the platform’s high level of semi-automation has sped up the process dramatically, enabling scientists to extract data from many more individual cells, with far greater accuracy and efficiency than previously possible, the study shows. 

Currently, techniques for studying single cells usually destroy them, meaning a cell can be studied either before treatment, or after.  

This device can take a “biopsy” of a living cell repeatedly during exposure to cancer treatment, sampling tiny extracts of its contents without killing it, enabling scientists to observe its reaction over time. 

During the study, the multi-disciplinary team, featuring biologists and engineers, tested cancer cells’ resistance to chemotherapy and radiotherapy using glioblastoma (GBM) - the deadliest form of brain tumor - as a test case, because of its ability to adapt to treatment and survive.