New technology revolutionizes the analysis of old ice

The oldest ice in the world is being drilled for here as part of the European “Beyond EPICA – Oldest Ice” project: the camp at Little Dome C in Antarctica.
Photo Credit: © PNRA/IPEV

Ice cores are a unique climate archive. Thanks to a new method developed by researchers at the University of Bern and Empa, greenhouse gas concentrations in 1.5-million-year-old ice can be measured even more accurately. The EU project “Beyond EPICA” with the participation of the University of Bern aims to recover such old ice in Antarctica.

The search for the oldest ice on earth has taken an important step forward. The Beyond EPICA – Oldest Ice project, a European consortium that includes the University of Bern, completed its second field season at the end of January. The drilling reached a depth of 808 meters. The project objective is to look back 1.5 million years into the past and obtain data on the development of temperature, the composition of the atmosphere and the carbon cycle. A depth of around 2700 meters must be reached in the Antarctic ice sheet and an ice core recovered. If everything goes as planned, this should be the case in 2025. Only then will the complex analysis of the oldest ice in this core follow, which new methods are currently being developed for.

Two-dimensional oxides open door for high-speed electronics

Furkan Turker, graduate student in the Department of Materials Sciences, works on a silicon carbide chip in the laboratory 
Photo Credit: Pennsylvania State University
 Creative Commons

Advances in computing power over the decades have come thanks in part to our ability to make smaller and smaller transistors, a building block of electronic devices, but we are nearing the limit of the silicon materials typically used. A new technique for creating 2D oxide materials may pave the way for future high-speed electronics, according to an international team of scientists.

“One way we can make our transistors, our electronic devices, work faster is to shrink the distance electrons have to travel between point A and B,” said Joshua Robinson, professor of materials science and engineering at Penn State. “You can only go so far with 3D materials like silicon — once you shrink it down to a nanometer, its properties change. So, there’s been a massive push looking at new materials, one of which are 2D materials.”

The team, led by Furkan Turker, graduate student in the Department of Materials Sciences, used a technique called confinement hetroepitaxy, or CHet, to create 2D oxides, materials with special properties that can serve as an atomically thin insulating layer between layers of electrically conducting materials.

“Now we can create essentially the world’s thinnest oxides — just a few atoms thick,” Turker said. “That allows you to bring conducting layers closer together than ever without letting them touch. This enables the formation of an ultrathin barrier between conducting layers, which is essential for the fabrication of next-generation electronic devices, such as diodes or transistors.”

Creating 3D objects with sound

The use of sound waves to create a pressure field to print particles. 
Image Credit: © MPI for Medical Research, Heidelberg University/ Kai Melde

Creating 3D objects with sound

Scientists from the Max Planck Institute for Medical Research and the Heidelberg University have created a new technology to assemble matter in 3D. Their concept uses multiple acoustic holograms to generate pressure fields with which solid particles, gel beads and even biological cells can be printed. These results pave the way for novel 3D cell culture techniques with applications in biomedical engineering.

Additive manufacturing or 3D printing enables the fabrication of complex parts from functional or biological materials. Conventional 3D printing can be a slow process, where objects are constructed one line or one layer at a time. Researchers in Heidelberg and Tübingen now demonstrate how to form a 3D object from smaller building blocks in just a single step. “We were able to assemble microparticles into a three-dimensional object within a single shot using shaped ultrasound”, says Kai Melde, postdoc in the group and first author of the study. “This can be very useful for bioprinting. The cells used there are particularly sensitive to the environment during the process”, adds Peer Fischer, Professor at Heidelberg University.

Tracking ocean microplastics from space

Video Credit: University of Michigan

Microplastic pollution can be spotted from space because its traveling companion alters the roughness of the ocean’s surface

New information about an emerging technique that could track microplastics from space has been uncovered by researchers at the University of Michigan. It turns out that satellites are best at spotting soapy or oily residue, and microplastics appear to tag along with that residue.

Microplastics—tiny flecks that can ride ocean currents hundreds or thousands of miles from their point of entry—can harm sea life and marine ecosystems, and they’re extremely difficult to track and clean up. However, a 2021 discovery raised the hope that satellites could offer day-by-day timelines of where microplastics enter the water, how they move and where they tend to collect, for prevention and clean-up efforts.

The team noticed that data recorded by the Cyclone Global Navigation Satellite System (CYGNSS), showed less surface roughness—that is, fewer and smaller waves—in areas of the ocean that contain microplastics, compared to clean areas.

Tidal stream power can significantly enhance energy security

A new study reveals the potential of tidal resources to make a marked difference on a community's clean energy ambitions
Needles, Isle of Wight, UK
Photo Credit: Dan

Adopting tidal power alongside other forms of renewable energy can significantly enhance energy security and go some way to enabling communities to fulfil their clean energy ambitions, a new study has shown.

Researchers found that installing tidal stream systems, in addition to solar and offshore wind farms, is around 25% more effective at balancing supply with demand than just relying on solar and wind technologies.

Using tidal technologies as part of a renewable energy mix can also reduce the space required for power-generating facilities, both on land and at sea, by around 33% and significantly reduce their visual impact since much of their operation is below the sea’s surface.

It can also help to reduce the levelized cost of whole-system energy, relative to solar and wind systems, because it reduces the requirement to access expensive reserve supplies.

Smart Contact Lens that Diagnoses and Treats Glaucoma

Schematic illustration of a theranostic smart contact lens for glaucoma treatment.
Illustration Credit: Pohang University of Science and Technology

POSTECH research team led by Professor Sei Kwang Hahn proposes a new paradigm for monitoring and control of intraocular pressure in glaucoma patients.

Glaucoma is a common ocular disease in which the optic nerve malfunctions due to the increased intraocular pressure (IOP) caused by drainage canal blocking in the eye. This condition narrows the peripheral vision and can lead to vision loss in severe cases. Glaucoma patients have to manage IOP levels for their lifetime. Automatic monitoring and control of the IOP in these patients would significantly improve their quality of life.

Recently, a research team at POSTECH has developed a smart contact lens by combining an IOP sensor and a flexible drug delivery system to manage IOP measurement and medication administration.

Engineers invent vertical, full-color microscopic LEDs

MIT engineers have developed a new way to make sharper, defect-free displays. Instead of patterning red, green, and blue diodes side by side in a horizontal patchwork, the team has invented a way to stack the diodes to create vertical, multicolored pixels.
Image Credit: Illustration by Younghee Lee

Take apart your laptop screen, and at its heart you’ll find a plate patterned with pixels of red, green, and blue LEDs, arranged end to end like a meticulous Lite Brite display. When electrically powered, the LEDs together can produce every shade in the rainbow to generate full-color displays. Over the years, the size of individual pixels has shrunk, enabling many more of them to be packed into devices to produce sharper, higher-resolution digital displays.

But much like computer transistors, LEDs are reaching a limit to how small they can be while also performing effectively. This limit is especially noticeable in close-range displays such as augmented and virtual reality devices, where limited pixel density results in a “screen door effect” such that users perceive stripes in the space between pixels.

Now, MIT engineers have developed a new way to make sharper, defect-free displays. Instead of replacing red, green, and blue light-emitting diodes side by side in a horizontal patchwork, the team has invented a way to stack the diodes to create vertical, multicolored pixels.

The moon is too hot and too cold; now it could be just right for humans, thanks to newly available science

Issam Mudawar’s research on heat transfer could enable space habitats to be built in extreme environments like the moon.
Photo Credit: Purdue University / John Underwood

With temperatures on the moon ranging from minus 410 to a scorching 250 degrees Fahrenheit, it’s an understatement to say that humans will need habitats with heat and air conditioning to survive there long term.

But heating and cooling systems won’t be effective enough to support habitats for lunar exploration or even longer trips to Mars without an understanding of what reduced gravity does to boiling and condensation. Engineers haven’t been able to crack this science – until now.

“Every refrigerator, every air conditioning system we have on Earth involves boiling and condensation. Those same mechanisms are also prevalent in numerous other applications, including steam power plants, nuclear reactors and both chemical and pharmaceutical industries,” said Issam Mudawar, Purdue University’s Betty Ruth and Milton B. Hollander Family Professor of Mechanical Engineering. “We have developed over a hundred years’ worth of understanding of how these systems work in Earth’s gravity, but we haven’t known how they work in weightlessness.”

A team of engineers at Purdue led by Mudawar, who is collaborating with NASA’s Glenn Research Center in Cleveland, has spent 11 years developing a facility to investigate these phenomena.

Solid material that 'upconverts' visible light photons to UV light photons could change how we utilize sunlight

Low-intensity visible blue light or lower energy photons being converted into higher energy UV photons using a solid film formed on a round glass substrate, developed by researchers at Tokyo Tech
 Image Credit: Prof. Yoichi Murakami

Ultraviolet (UV) light has higher energy photons than visible light and, thus, has more applications. Tokyo Tech researchers have now developed a brilliant innovation—a solid-state material that can stably and efficiently upconvert sunlight- intensity visible light photons to UV light photons. This photon upconversion (UC) material can utilize visible light to successfully drive reactions that would conventionally need UV light, broadening the spectrum of utility for the former.

The importance of solar power as a renewable energy resource is increasing. Sunlight contains high-energy UV light with a wavelength shorter than 400 nm, which can be broadly used, for example, for photopolymerization to form a resin and activation of photocatalysts to drive reactions that generate green hydrogen or useful hydrocarbons (fuels, sugars, olefins, etc.). The latter of these is often called "artificial photosynthesis." Photocatalytic reaction by UV light to efficiently kill viruses and bacteria is another important application. Unfortunately, only about 4% of terrestrial sunlight falls within the UV range in the electromagnetic spectrum. This leaves a large portion of sunlight spectrum unexploited for these purposes.

Lockheed Martin’s First LM 400 Multi-Mission Spacecraft Completed, Ready For Final Testing

Lockheed Martin’s first LM 400 mid-sized, multi-mission spacecraft will launch in 2023 as a technology demonstrator.
Resized Image using AI by SFLORG
Photo Credit: Lockheed Martin Corporation

The first Lockheed Martin LM 400, a flexible, mid-sized satellite customizable for military, civil or commercial users, rolled off the company’s digital factory production line and is advancing toward its planned 2023 launch.

The agile LM 400 spacecraft bus design enables one platform to support multiple missions, including remote sensing, communications, imaging, radar and persistent surveillance. Lockheed Martin invested in common satellite designs to support demand for more proliferated systems, high-rate production and affordable solutions. The LM 400 is scalable and versatile starting at the size of the average home refrigerator, with capability to grow for higher power and larger payloads and packaged to enable multiple satellites per launch.

The LM 400 bus can operate in low, medium or geosynchronous earth orbits, providing greater flexibility than other buses in this class. The LM 400 space vehicle is compatible with a wide range of launch vehicles in a single, ride-share or multi-launch configuration.

A fresh look at restoring power to the grid

Sandia National Laboratories computer scientists Casey Doyle, left, and Kevin Stamber stand in front of an electrical switching station. Their team has developed a computer model to determine the best way to restore power to a grid after a disruption, such as a complete blackout caused by extreme weather.
Photo Credit: Craig Fritz

Climate change can alter extreme weather events, and these events have the potential to strain, disrupt or damage the nation’s grid.

Sandia National Laboratories computer scientists have been working on an innovative computer model to help grid operators quickly restore power to the grid after a complete disruption, a process called “black start.”

Their model combines a restoration-optimization model with a computer model of how grid operators would make decisions when they don’t have complete knowledge of every generator and distribution line. The model also includes a physics-based understanding of how the individual power generators, distribution substations and power lines would react during the process of restoring power to the grid.

“We’ve spent a lot of time thinking about how we go beyond simply looking at this as a multi-layered optimization problem,” said project lead Kevin Stamber. “When we start to discuss disruptions to the electric grid, being able to act on the available information and provide a response is critical. The operator still has to work that restoration solution against the grid and see whether or not they are getting the types of reactions from the system that they expect to see.”

The overarching model also can simulate black starts triggered by human-caused disruptions such as a successful cyberattack.

Researchers combine classical and quantum optics for super-resolution imaging

A conceptual rendering of the super-resolution experiment, which will be enabled by a grant from the Chan Zuckerberg Initiative.
Illustration Credit: Courtesy of Colorado State University

The ability to see invisible structures in our bodies, like the inner workings of cells, or the aggregation of proteins, depends on the quality of one’s microscope. Ever since the first optical microscopes were invented in the 17th century, scientists have pushed for new ways to see things more clearly, at smaller scales and deeper depths.   

Randy Bartels, professor in the Department of Electrical Engineering at Colorado State University, is one of those scientists. He and a team of researchers at CSU and Colorado School of Mines are on a quest to invent some of the world’s most powerful light microscopes – ones that can resolve large swaths of biological material in unimaginable detail.   

The name of the game is super–resolution microscopy, which is any optical imaging technique that can resolve things smaller than half the wavelength of light. The discipline was the subject of the 2014 Nobel Prize in Chemistry, and Bartels and others are in a race to keep circumventing that diffraction limit to illuminate biologically important structures inside the body.  

New DNA Biosensor Could Unlock Powerful, Low-Cost Clinical Diagnostics

In a new study, researchers demonstrate the capability of DNA biosensor components for a unique modular DNA biosensor. The researchers plan to integrate their design within a device the size and shape of a smartphone for low-cost clinical diagnostics. 
Illustration Credit: N. Hanacek/NIST

DNA can signal the presence of or predisposition to a slew of diseases, including cancer. The ability to flag down these clues, known as biomarkers, allows medical professionals to make critical early diagnoses and provide personalized treatments. The typical methods of screening can be laborious, expensive or limited in what they can uncover. A new biosensor chip that boasts an accurate and inexpensive design may increase accessibility to high-quality diagnostics. 

The biosensor, developed by researchers at the National Institute of Standards and Technology (NIST), Brown University and the French government-funded research institute CEA-Leti, identifies biomarkers by measuring how binding occurs between DNA strands and the device. What sets it apart from other similar sensors is its modular design, which lowers costs by making it easier to mass produce and allowing the most expensive components to be reused. 

In a paper just posted online from the latest IEEE International Electron Devices Meeting, the researchers presented results of a study that demonstrates the device’s high sensitivity and precision despite its modularity, which is typically associated with diminished performance.

Scientists Unveil Least Costly Carbon Capture System to Date

Chemist Dave Heldebrant, a recently selected fellow of the American Chemical Society who holds a joint appointment with Washington State University, has helped design several solvents that can deftly capture carbon dioxide molecules before they reach Earth’s atmosphere. 
Photo Credit: Andrea Starr | Pacific Northwest National Laboratory

The need for technology that can capture, remove and repurpose carbon dioxide grows stronger with every CO2 molecule that reaches Earth’s atmosphere. To meet that need, scientists at the Department of Energy’s Pacific Northwest National Laboratory have cleared a new milestone in their efforts to make carbon capture more affordable and widespread. They have created a new system that efficiently captures CO2—the least costly to date—and converts it into one of the world’s most widely used chemicals: methanol.

Snaring CO2 before it floats into the atmosphere is a key component in slowing global warming. Creating incentives for the largest emitters to adopt carbon capture technology, however, is an important precursor. The high cost of commercial capture technology is a longstanding barrier to its widespread use.

PNNL scientists believe methanol can provide that incentive. It has many uses as a fuel, solvent, and an important ingredient in plastics, paint, construction materials and car parts. Converting CO2 into useful substances like methanol offers a path for industrial entities to capture and repurpose their carbon.

Soft robots harness viscous fluids for complex motions

Soft Robot
Video Credit: Courtesy of Collective Embodied Intelligence Lab | Cornell University 

One of the virtues of untethered soft robots is their ability to mechanically adapt to their surroundings and tasks, making them ideal for a range of roles, from tightening bolts in a factory to conducting deep-sea exploration. Now they are poised to become even more agile and controlled.

A team of researchers led by Kirstin Petersen, assistant professor of electrical and computer engineering in the College of Engineering, designed a new – and surprisingly simple – system of fluid-driven actuators that enable soft robots to achieve more complex motions. The researchers accomplished this by taking advantage of the very thing – viscosity – that had previously stymied the movement of such robots.

The team’s paper, “Harnessing Nonuniform Pressure Distributions in Soft Robotic Actuators,” published Jan. 20 in Advanced Intelligent Systems. The paper’s lead author is postdoctoral researcher Yoav Matia.

DARPA Selects Aurora Flight Sciences for Phase 2 of Active Flow Control X-Plane

DARPA CRANE X-Plane configuration in development for flight testing Active Flow Control (AFC) technologies
Image Credit: Defense Advanced Research Projects Agency

DARPA has selected Aurora Flight Sciences to move into the detailed design phase of the Control of Revolutionary Aircraft with Novel Effectors (CRANE) program. This follows successful completion of the project’s Phase 1 preliminary design, which resulted in an innovative testbed aircraft that used active flow control (AFC) to generate control forces in a wind tunnel test. Phase 2 will focus on detailed design and development of flight software and controls, culminating in a critical design review of an X-plane demonstrator that can fly without traditional moving flight controls on the exterior of the wings and tail.

The contract includes a Phase 3 option in which DARPA intends to fly a 7,000-pound X-plane that addresses the two primary technical hurdles of incorporation of AFC into a full-scale aircraft and reliance on it for controlled flight. Unique features of the demonstrator aircraft will include modular wing configurations that enable future integration of advanced technologies for flight testing either by DARPA or potential transition partners.

Getting under your skin for better health

UC College of Engineering and Applied Science professor Jason Heikenfeld in his Novel Devices Lab.
 Photo Credit: Andrew Higley/UC Marketing + Brand

The next frontier of continuous health monitoring could be skin deep.

Biomedical engineers at the University of Cincinnati say interstitial fluid, the watery fluid found between and around cells, tissues or organs in the body, could provide an excellent medium for early disease diagnosis or long-term health monitoring.

In a paper published in the journal Nature Biomedical Engineering, they outlined the potential advantages and technological challenges of using interstitial fluid.

“Why we see it as a valuable diagnostic fluid is continuous access. With blood, you can’t easily take continuous readings,” said UC doctoral graduate Mark Friedel, co-lead author of the study.

“Can you imagine going about your day with a needle stuck in your vein all day? So, we need other tools.”

Algae Can Help Dispose of Hazardous Substances and Produce Bioethanol

Algae can absorb zinc, magnesium, iron, aluminum, silicon and lead.
Photo Credit: Rodion Narudinov

Scientists of the Ural Federal University have developed a technology for the production of environmentally friendly bioethanol fuel using waste heat from thermal power plants (TPP) and combined heat and power plants (CHPP) and freshwater algae produced in large quantities in cooling ponds. The use of this technology leads to a reduction in harmful emissions and makes energy production more efficient. The developers emphasize that the technology signifies a transition from hydrocarbon to green energy. An article describing the technology has been published in the International Journal of Hydrogen Energy.

TPPs and CHPPs are the main suppliers of heat, light, and hot water; at the same time, they are sources of greenhouse gas emissions generated during fuel combustion and saturated with carbon dioxide, soot, unburned particles, and various chemical substances. Another byproduct is the so-called waste heat - water heated during the cooling of superheated steam, rotating turbines of TPPs and CHPPs. The waste heat, in the form of steam, evaporates into the atmosphere in large quantities and is discharged together with industrial effluents into storage ponds. Process water containing solutions of hydrochloric acid, caustic soda, ammonia, ammonium salts, iron and other substances is discharged after flushing the flue gases and boiler units.

Sensing the Odor Molecules on Graphene Surface Layered with Self-Assembled Peptides

Graphene-based olfactory sensors that can detect odor molecules based on the design of peptide sequences were recently demonstrated by researchers at Tokyo Tech. The findings indicated that graphene field-effect transistors (GFETs) functionalized with designable peptides can be used to develop electronic devices that mimic olfactory receptors and emulate the sense of smell by selectively detecting odor molecules.

Olfactory sensing or odor sensing is an integral part of many industries including healthcare, food, cosmetics, and environmental monitoring. At present, the most commonly used technique for detecting and estimating odor molecules is gas chromatography–mass spectrometry (GC–MS). Though very effective, GC–MS has some limitations, such as its bulky setup and limited sensitivity. As a consequence, scientists have been looking for more sensitive and easy-to-use alternatives.

In recent years, graphene field-effect transistors (GFETs) have begun being used to develop highly sensitive and selective odor sensors by integrating with olfactory receptors, also known as electronic noses. The atomically flat surfaces and high electron mobility of graphene surfaces make GFETs ideal for adsorbing odor molecules. However, the application of GFET as electrical biosensors with the receptors is severely limited by factors, such as the fragility of receptors and the lack of alternative synthetic molecules that can function as olfactory receptors.

New, safe, and biodegradable compound blocks radiation

Hesham Zakali: The material developed by an international group of scientists could become an alternative to toxic lead, for example.
Photo Credit: Anastasia Kurshpel

Polylactic acid combined with tungsten trioxide effectively blocks gamma radiation, an international group of scientists including specialists from Russia (Ural Federal University), Saudi Arabia and Egypt has found. In the future, it will be possible to create safe and biodegradable screens for protection against low-energy radiation on the basis of the new material, the researchers believe. Such screens are used in medicine, agriculture and the food industry. A description of the material has been published in the journal Radiation Physics and Chemistry.

"Polylactic acid is a non-toxic polymer of natural origin. It is inexpensive and, importantly, can be broken down by microbes when placed in an industrial plant at high temperatures. Since lactic acid is regularly produced as a byproduct of metabolism in both plants and animals, polylactic acid and its degradation products are non-toxic and safe for the environment," explains Hesham Zakali, co-author of the development and Researcher at the Department of Experimental Physics at UrFU.